May 07, 2022
I took ten years to get my pilot's license. From March 17, 2010 to December 30, 2020. It was amazing. I now find myself a year and a half later from achieving my goal and I don't find myself interested enough right now to go flying. There's a gas crisis, there's a pandemic, there's a lot of political things going on, a war in Ukraine, that it kind of feels bad wasting hundreds of dollars just going sight seeing.
I just completed a ground school course for my Instrument Rating -- I still need to take the written test part. With that out of the way I can start actually flying with an instructor to get my instrument rating. One of the planes the club that I am a part of has is a Mooney M20J. This requires 250 hours of flight time, or 100 hours and an instrument rating. I'm at that annoying 145 hour mark that dissuades me from wasting 100 hours just to fly that plane, and wanting to get my instrument rating.
I left my previous job last December so I didn't have the excess money to fly for a month while job hunting, and well, habit becomes habit... I haven't flown since October! I'm definitely in a better place now, with a much nicer job and salary though. I'm hoping to maybe pick it back up again this fall. I wasn't pleased AT ALL (those who follow me on twitter will probably know this, online class is not the environment for me) with the ground school over Zoom, so I want to redo this by watching the Sporty's ground school. I need to put aside some time over the next coming weeks to actually sit down and watch it. Hopefully I can start flying with an instructor soon. I'm not looking forward to taking the written test, as I have to go visit a testing center at RDU airport - so there is that kind of delaying me too.
May 25, 2012
I met this random kid online on IRC a year and a half ago (I believe it was December 19th, 2010). His name was HarryD. We got talking and one time he mentioned that he was going to hike Mount Monadnock. That is near me so we got talking and he said he lived near North Hampton, MA. That was cool that I met some random kid who lived near me. He was only 17 at the time.
Eventually we met up because my new girlfriend lived near NoHo in Holyoke. One day I went down to see her and met up with him. He was wearing all brown, so I joked that he was a UPS delivery guy. We hung out for a bit, I think I met his friend Sam that day. Then I left and went home. For the next year we would hang occasionally, usually I would go down and visit NoHo because it was easy for him to Bike to and he worked there. We went bowling, once or twice, and he came up for this super bowl to watch Star Wars instead because screw sports!
I think that was the last time I saw him.
On this Saturday, May 19th, 2012, he was riding his bicycle in North Hampton and collided with a car, sending him flying off and smacking his head on the edge of the curb. There are some other details which I am not 100% sure about. He then was in the hospital until Tuesday May 22, 2012 at which time he passed away.
We used to talk every day, either on IRC, AIM or gTalk. His account on IRC (no_numbers_here) is still active because his VPS for http://harry.is is still paid for and online until the next billing period. Its so sad seeing his name online and not being able to send a "hey dood" or some other random greeting, then start talking about computers, python, bikes, etc.
Harry was an avid cyclist. I am reading stories that even if he had to go thirty feet, he would hop on his bike to get there. He got me interested in cycling as well. He was going to sell me a bike, but the I was talking to a friend and he gave me on, so I never bought it. Which as it turns out was good as he wanted to give that to his new girlfriend.
I was planning on hanging out with him next weekend, as he was busy with something this weekend that I can't remember. I wanted to take him target shooting, and wanted to eventually be in enough shape to go hiking with him. None of this ever came to fruition.
Harry Delmolino, we may not have been as close as we could have been, but you definitely made a difference in my life for the better and I never got to thank you for this.
Edit:
I went to the Calling Hours today and I was only there maybe a half hour, but there were so many people there. It's amazing that a man so young has touched so many lives of so many people, and had accomplished so much. People might say "Oh we was just a kid, he was only 18″ but if they looked at the accomplishments of this young man, they would realize how grown up he was.
I think his mother and father might eventually delete his Facebook, so I went back and took a screenshot of one of our last conversations so I can remember. Everything he said usually warranted a laugh.
May 07, 2012
For the past three months I have been upgrading and rewriting version 2 of my software for Hypertherm. I am under a contract for my father's company. His company is developing a machine to test how well air flows (laminar flow) through a plasma cutting torch head, and how much air leaks out over a certain time (delta pressure loss).
This has been a nice adventure. I am talking to the tester over serial, reading in a hand scanner (barcodes and acts as a keyboard easy), talking to a DYMO printer and using a database.
The serial communication was pretty straightforward. I started a new thread and listen for serial all the time. The tricky part with that was that because it was on another thread, I needed a delegate to talk to my UI when I did things like change the picture from blank to a big red X, or update a label.
The hand scanner wasn't even a factor that took longer than 10 minutes, I just pop up a dialog box asking for input.
The DYMO printer was the hardest part. This took me a month to figure out, I kept fighting with the printer. I could figure out how to print to the left roll, the ones we setup as as the passing labels, but I couldn't for the life of me figure out how to get it to print to the right label, using a custom label. I tried to load the labels into data and use a StreamWriter/StreamReader object to treat that as the label, but it kept printing one that had, for reasons unknown to me, been locked into the printer. I finally gave up on using the interface they provided and am writing the label to a temporary file. The file is in the user's %appdata% directory in a sub directory that it will not be mistakenly written to, so I feel safe doing it this way. Granted, the machine is a single purpose machine, once this program is installed it will only run this program day and night.
Once I got the printer working, I checked it in to github and realized it took me way longer than anticipated. I learned a lot about .NET development (by no means everything, or even most things, just a lot compared to what I did know before [nothing].)
Tonight while developing I decided to video some aspects of the Program.
The following four links are videos, showing parts of the program and machine in action.
- [Hosted on Qik - no longer available]
- [Hosted on Qik - no longer available]
- [Hosted on Qik - no longer available]
Feb 17, 2012
I was invited to a Hackathon that one of our client's client was throwing. Being that I love programming and learning, I decided I would go.
The event was in Cambridge, MA. I arrive early, (my friend said there would be a lot more traffic than there was at that time of day) so I got a tour of office. It's situated in an old, what I believe to be, factory building. The coolest part of the office was that they had whiteboard paint on every wall surface, complete with markers of course.
The event started and people who were attending had tossed up ideas on the white board. A couple people wanted to integrate LinkedIN with HubSpot. Another person wanted to integrate Eventbrite with HubSpot, to get information to/from event goers after the event ends. I didn't like any of those ideas and my only experience with HubSpot is their Leads API, so I stuck to what I know.
I had an idea for an app the second I walked in the door, it was like magic. My main hassle was that HubSpot's Canvas integration REQUIRES HTTPS. Now, my web host is DreamHost and I am kind of cheap, so of course I don't have any way to host a HTTPS site immediately. A big part of me wanted to bite the bullet and order a secure server from DreamHost, or setup another linode, but I felt that I've been spending a lot of money lately and that I would figure out a way. Adrian, my contact at HubSpot, of who I am working with on the PPC project(more on that later), walked by and saved me.
He asked if I had ever used GoogleAppEngine. Of course I hadn't because I was under the belief that it cost money to use, but then I realized I was thinking of Amazon's EC2. I sign up for GAE and within an hour I have a HelloWorld site setup. The slow part was installing Python2.5 so I could use the same version that GAE used and not have to fix a lot of backwards compatibility errors between 2.5->2.7.
After I had a site up that could do HTTPS I dove into programming for my HubSpot app. The app I am doing for work graphs leads per day combined with Google AdWords data per day. I decided to do something different. My app is still a graph, as graphs are fun and easy to understand by everyone.
This app graphs a set of leads and shows how many leads happened in a given hour for the previous day. Given extra time I would have added an interface to specify the day to graph leads, but last night my time was severely limited by the fact that I had to setup my environment for GoogleAppsEngine.
Improvements I can and want to do to this app are database, faster processing, and being able to select a date. I almost wanted to break down and learn NodeJS for this, because from my understanding of the event driven nature of NodeJS would be a lot easier to load data over a longer period of time, than to just load it all at once and timeout with HubSpot's Jakarta Commons-HttpClient.